Garages & sheds
Garages and sheds do not have standard sizes anymore, we can design sheds to any size and most shapes to suit the conditions of the site. Sometime the site might require us to taper a building into a back corner which is not square to get the most out of the available space. We can customise the building easily to suit local conditions by changing the roof design between skillion or gabled with or without eaves. Change the roof pitch between 5, 11, 15, 22, 30 & 45. Change the wall cladding with k-panel, corrugated, Monoclad, m-panel and Lysaght weatherboards, with either vertical or horizontal installation. Once the building design is finalised we can add windows, personal access doors, roller doors, glass sliding doors, insulation, add additional weight loadings to the roof to allow for plaster lining or solar panels. Internal dividing walls, open bays, adding a lean-to or veranda to the front or side of the building are other easy options to add to the shed. Machinery sheds, farm shed, industrial and commercial sheds all start with 4 walls and a roof like a standard shed or garage, just add open and closed sections, change the height lengths and spans where required to customise what you need. Part of our commitment to our clients is we only use BlueScope Australian steel. That way we have the confidence to be able to back our product over the test of time. BlueScope has warranties of up to 20 years depending on the site location.